BACK PANEL
1.-
AC power socket
: for connecting the 230 V AC power supply cable included with the amplifier.
2.-
AC fuse
: fuse that protects the equalizer. The fuse should only be changed, by a professional, if there
is a fault or a change in voltage in the power supply. If the fuse blows again, do not use the equipment
and get in contact with the authorized FONESTAR technical service.
3.-
Earth switch
: switch that is used to disconnect the earth signal from the case. If there is buzzing in the
system due to the earth connection or links to other pieces of equipment, move this switch to the LIFT
position.
4.-
UNBALANCE
: unbalanced signal input and output RCA connectors. Connect the input to IN and the
output to OUT.
5.-
BALANCE
: input and output connectors, 6.3 mm stereo jack. For a balanced signal, connect the jack
in the following way: positive (+) the tip, negative (-) the centre and the mass at the back. For an
unbalanced signal, connect the positive to the tip and the mass to the back. Connect the input to the
IN and the output to the OUT.
6.-
BALANCE
: input and output XLR connectors. For an unbalanced signal, connect pin 1=earth, pin
2=po) and pin 3=negative(-). For an unbalanced signal connect: pin 1 and pin 3=earth and pin
2=positive (+). Connect the input to IN and the output to OUT.
- 5 -
EN