11.- Wi-Fi Protected Setup (WPS) button. It has several operating modes:
1) Short press: WPS function, allows the device to be connected wirelessly to the existing network and
so operate correctly. The WPS button must be pressed when the
ELIPSE-5WIFI
loudspeaker is first
connected to the network. This connection is made using the
MÜZO
APP which indicates when to
press it.
2) 8-second press: to activate/deactivate the priority function through signal level of the aux input. By
default, priority is deactivated.
12-.
AUX
: aux input, 3.5 mm jack connector. This input has priority through signal level.
Note
: by default, priority is deactivated. In order to activate the priority function in this input, press and
hold the button for 8 seconds (11).
13.- USB storage device connection port. Allows the playback of audio files contained in MP3 format.
14.- Ethernet input for connecting the loudspeaker to a router, RJ-45 connector. Allows the connection of the
device to a router using cable to be subsequently operated via the mobile application. For more
information, consult the Instructions for Use section.
15.- Power supply input 230 V AC.
16.-
FUSE
: AC power supply circuit protective fuse.
17.- Loudspeaker LED power indicator.
18.-
POWER
: active loudspeaker on/off switch.
OPERATING WITH ETHERNET CABLE
- The
ELIPSE-5WIFI
loudspeaker can also operate in the same way using ethernet cable, instead of
wirelessly. In order to do so, connect the loudspeaker to a router using the input indicated:
- It operates in the same way as in wireless mode. Use the
MÜZO
application to configure each
loudspeaker in the installation.
Wi-Fi OPERATING
- In order to control remotely and get maximum benefit from the functions of this pair of loudspeakers, the
free
MÜZO
application can be used. It is available for downloading in the PlayStore for Android or in
AppleStore for iOS. Using this application, you can connect the device to the Wi-Fi network, change the
mode, increase/decrease the the volume as well as set and control the radio stations; all this for one or
several
ELIPSE-5WIFI
loudspeakers.
- First, download and install the APP and follow the steps for connecting the loudspeaker to a Wi-Fi network.
Once connected, you will have access to all the functions from your mobile device.
- 5 -
EN
