EN
- 6 -
PARALLEL MODE
Place the MODE selector on the back of the power amp in the PARALLEL position. In this mode, the input
of the two channels will be the channel CH A input signal. Connect the channel CH A input and the two
loudspeaker outputs. The volume in the two channels is adjusted separately.
BRIDGE MODE
Place the MODE selector on the back of the power amp in the BRIDGE position. In this mode, the input from
the two channels will be the channel CH B input signal. The two channels from the power amp are connected
internally so that their power is combined in one single output. Connect the channel CH A input and the
BRIDGE loudspeaker output. The volume is adjusted using the CH A and CH B channels.
160718_DSA-300_MANUAL_(EN)_Maquetación 1 18/8/16 13:34 Página 6
