FONESTAR AS-160WRUB, Инструкция по эксплуатации

Страница: 6 / 13

EN
- 6 -
REMOTE CONTROL
1.- q : button to switch on/place in standby mode the player module.
2.- MUTE : activates/deactivates the audio output.
3.- INPUT : allows the required input or audio source to be selected.
Press this button several times to change among the available
inputs.
4.- EQ : allows selection among the different equalizations.
5.- FM : allows the FM tuner to be selected directly.
6.- SCAN : allows automatic tuning of the FM radio stations. The
stations are saved in consecutive memory positions.
7.- CH-/CH+ : allows you to pass to the previous/next stored radio
station.
8.- USB : allows the USB storage device to be selected directly.
9.- Allows the bluetooth mode to be selected directly.
10.- VOL+/VOL- : volume controls.
11.- 7 / 8 : in playback mode, a short press of these buttons allow you
to move to the previous/next track.
12.- 12 : in playback mode, allows playback to be started/paused.
13.- SD : allows the SD memory card to be selected directly.
14.- AUX : allows the aux input to be selected directly.
15.- 0-9 : number selection buttons.
16.- Allows the playback mode to be selected.
17.-
3
: stops playback.
BLUETOOTH RECEIVER
- These models AS-160WRUB and AS-161WRUB allow playback of MP3 files contained in your mobile
phone if it is paired with the bluetooth receiver module of these amplifiers.
- In order to pair your mobile phone with the bluetooth receiver, select the Bluetooth option with the knob
located on the front panel of the amplifier or on the remote control. With the bluetooth option activated in
your mobile phone, select the corresponding device from the list of bluetooth devices. At that moment,
your mobile phone will be paired with the device.
- The playback options (play, pause, previous/next track, etc) are available through the controls on the
amplifier itself or the remote control.
AS-160WRUB_AS-161WRUB_MANUAL_(EN)_20170703_Maquetación 1 16/2/18 12:45 Página 6