It has a USB player of MP3 files with ID3 incorporated to show the names of the tracks, of the album, etc.
and it accepts USB memories and hard discs. It also counts on an AM/FM digital radio tuner with 64 pre-
tuned channels with RDS showing information on the tuned station.
2 microphone inputs with independent volume control let you use the amplifier for speech playback. Besides,
there are 4 inputs available which make it easier to connect various audio sources, including a phono signal
input for turntables (DVD, CD, AUX/PHONO selectable and VCR).
It has a central volume control with precise adjustment; bass, treble and balance control through a menu; VFD
screen and remote control.
There is also an output to connect 2 groups of selectable A/B speakers, recording and headphone output.
CONTROLS AND FUNCTIONS
FRONT PANEL
1.-
Remote control sensor
: remote control signal receiver.
2.-
Display
: shows information on the receiver, for example the chosen source, volume, etc.
3.-
VOLUME
: output volume control.
4.-
USB/TUNER/EXIT
: Pressing this button chooses the USB player (*). Pressing again chooses the radio
receiver. To exit the radio receiver, press this button again (the display will show TUNER EXIT) and then
press the button for the chosen input.
This button also works to reset the amplifier and recharge the default values. To do this with the amplifier
switched off, press the POWER button to switch it on and then hold down the USB/TUNER/EXIT button
and without letting go press the STANDBY button until RESET is shown on the display.
5.-
DVD/AM-FM/
12
: Choose the DVD input signal.
With the radio receiver activated choose between the AM and FM frequency bands.
With the USB player activated start or pause playback (
*
).
6.-
CD/SCAN-/
2a
: Choose the CD input signal.
With the radio receiver activated, implement the SCAN- function, with one press a lower frequency is
tuned into, with a continuous press for a few seconds the following station found at a lower frequency
will automatically be tuned into.
With the USB player activated, it chooses the previous element (
*
).
7.-
AUX-PHONO/SCAN +/
d2
: Select the AUX/PHONO input signal depending on the position of the
AUX/PHONO selector on the back panel.
With the radio receiver activated implement the SCAN+ function, with one press a higher frequency is
tuned into, with a continuous press for a few seconds the next station that is found at a higher frequency
will automatically be tuned into.
With the USB player activated, it chooses the following element (
*
).
- 4 -
EN
