- 6 -
d.- Quality/calidad: for selecting the message audio quality. Select low quality/baja (64 kbps) if you
have a loaded network or normal quality/normal (128 kbps) or high/alta (320 kbps) if you have a
network with enough bandwidth.
e.- Specific volume/volumen específico: if you select this option the volume of the instant message
transmitted can be adjusted. By default the volume selected will be transmitted in each one of the
receivers.
f.- Last files used/últimos archivos usados: this shows a list of the last instant messages sent, so that
they can be sent again quickly.
6.- Voice message/mensaje de voz: for sending a voice message through a microphone connected to the
computer.
The window below will appear:
g.- Devices available/dispositivos: select the devices that you want to send the voice message to and
press the + button to add them to the list of destiny devices.
h.- Specific volume/volumen específico: if this option is selected, you can choose the specific volume
that the voice message will be sent at. The selected volume will be transmitted through each one
of the receivers by default.
i.- Speak/Stop / Hablar/parar: press the button and speak through the microphone. Once the
message has been transmitted, press the button again to finish.
7.- Set/configurar: for remotely making adjustments on the selected receiver.
A.- Network/Red: for selecting the DCHP state.
DCHP activated/activado: automatic setting of the network parameters.
DCHP deactivated/desactivado: the IP address, subnet mask and gateway must be inserted.
EN
AIP-3010_MANUAL_(EN)_20170529_Maquetación 1 29/5/17 9:35 Página 6
