FONDUSSIMO FD2330, Руководство пользователя и гарантия

Страница: 8 / 28

8
FONDUSSIMO
ASSEMBLING THE LID
PARTS
• Screw
• Lid
• Centering washer
• Plastic handle
INSTRUCTIONS
1. Insert the screw in the lid’s hole
from the inside toward the outside;
2. Thread the centering washer on the part
of the screw that sticks out, with “flat” side
toward the lid;
3. Screw the plastic handle and fix it into place using
a Phillips screwdriver avoiding overtightening.
MAINTENANCE AND CLEANING
• Unplug the product.
• Always disconnect the power cable and allow the product to completely
cool off before cleaning it.
HEAT-TEMPERED GLASS LID
• Sanitize and scrub with a damp cloth or sponge with water and dish soap.
Rinse with water and wipe off completely to eliminate any water.
WARNING: Do not submerge the lid in water if it’s very hot; the high temperature
could damage it.
BASKETS
• The baskets are dishwasher-safe. Always rinse them right after the meal
to avoid food sticking to them.
RING
• The ring is dishwasher safe. For your safety, always wait for the fondue pot to cool before
removing it, then rinse and clean it immediately to prevent food from sticking to it.
Removing the ring after each meal is recommended to allow cleaning of the fondue pot.
HEATING BOWL
• Use a damp cloth and a little mild soap to clean the fondue pot and the base,
followed by a damp cloth without soap. Then dry thoroughly. Never submerge
the base in water or any other liquid. In the event of residue stuck on the inner
surface of the bowl, scrub with a small amount of vegetable oil, rinse with
a damp soapy cloth and dry with a dry cloth.
POWER CORD
• Wipe off the greasy splashes and food residue with a dry cloth.