2.3.2 FITTING THE DEVICE INTO THE FRAME
Tighten the two screw/washer units
on the side
Tighten the two screw/washer units at
the top
Position the air-conditioner in the
frame from inside the cellar
Check the seal between the wooden frame and the Winemaster. The electrical connection cable and the
PVC condensate tube are situated inside the cellar.
2.3.3 INSTALLING THE WATER DRAINAGE SYSTEM
The container for collecting condensate is glued onto the cover. You are recommended to attach the pipe
when the cover is off.
Refit the cover on the Winemaster
and tighten the 4 screws
The pipe is well attached.
Tighten the collar using a universal
wrench or pliers.
Place the collar as close to the cover
as possible for better adhesion.
Push the PVC pipe on, being careful
to support the tray with the other
hand.
Flow from the condensate collection
tray.
Important :
Wait for 24 hours before switching on the air-conditioner
.
WINEMASTER C18 / C18S(R) USER GUIDE
November 2002
Page 29
