USER
MANUAL
WINE
IN25
Page 15
-
Press button
one second until the targeted temperature is blinking.
-
Use button
to increase the temperature or
-
Use button
to lower the temperature.
-
When the right temperature is set, press again on button
to confirm it.
Explanations of the main display symbols:
Red light
= cold mode engaged (compressor working)
Red light
= cooling fan high speed
Red light
= defrost
Red light
= heat mode engaged (resistance)
3.3.
Standby mode
-
Stanby mode : maintain a 3 seconds pressure on button 1. The compressor
stops and the fan turn at low speed.
-
The thermostat indicates « OFF » and also the cellar temperature.
-
To come back, maintain again a 3 seconds pressure on button 1.
-
The thermostat indicates « ON » during 1 second.
3.4.
Automatic defrost
The program of the thermostat will run an automatic defrost time several times a day. During this
operation, the compressor is stopped, only the fan is functioning at low speed. The condensate water
producing during this period will be evacuated through the tube drain.
