10
2.4 CONVERSION ELIOS FROM LPG TO METHANE AND VICE VERSA
1
= Gas nozzle
2
= Cap securing screw
3
= Air regulation cap
4
= Hose connection
Figure 2.A
TO CHANGE THE FEED GAS OF YOUR ELIOS, YOU CAN ASK FOR DIFFERENT
NOZZLES WHICH ARE AVAILABLE AS OPTION.
CAUTION:
after each conversion, you must replace the plate that identifies the type of gas. The
replacement plate is in the same bag as the nozzle and must by stuck in the place of the old plate.
The latter is located in the support bracket of the of the metal burner block and can be identified by
looking at Elios from the bottom.
1.
Close the gas line faucet.
2.
Remove the grill or the wok-supporting ring and remove the
burner
(
point 2 figure 1.A
).
3.
With a 3 mm hexagonal spanner, unscrew the three screws on the basin and remove it (
point
2 figure 1.A
).
4.
Remove the
hose connection
(
point 4 figure 2.A
), remove the seal inside and place it inside
the hose connection supplied in the bag (the LPG one has a tight hole, while the methane
one has a large hole), paying attention to the state of wear of the seal. If necessary, replace it
with a suitable one.
5.
Unscrew screw
2
of
figure 2.A
with a 4 mm hexagonal spanner in order to unlock the air
regulation
cap
(
point 3 figure 2.A
).
6.
Move the cap so as to have as much space possible to replace the gas nozzle (if it does not
move, simply turn it a bit).
7.
Unscrew the
gas nozzle
to be replaced with an 11 mm spanner (
point 1 figure 2.A
) and
screw on the new one suitable for the gas you want to use. (each gas nozzle is characterized
by an engraved number which identifies the type of gas for which it is designed. See
table 1
for the number suitable for the gas type).
8.
Close the cap until you have a distance equal to
X
(see
table 1
for the measurement and
Содержание ELIOS PLUS
Страница 1: ...ELIOS PLUS ELIOS WOK INSTRUCTIONS FOR USE AND INSTALLATION E N...
Страница 2: ...V 01 18...
