fomex Dp Series, Руководство пользователя

Страница: 8 / 11

Check the input voltage.
When the input voltage is lower than the rated voltage, the flash may not produce its
maximum output.
Disconnect this unit from the power supply before changing a bulb or a fuse.
Use the specified fuse only.
Do not use in humid or hazardous places or near inflammable materials.
The flash can stop working to enable cooling after maximum output and long-term
continuous use.
Do not use the flash near the eyes.
For safety, please power OFF when not in use.
Do not move the flash while the power is on.
Make sure not to use a softbox near inflammable materials.
The heat emitted from the product may cause a fire.
Do not drop and shock the product.
When either assembling or disassembling accessories (e.g.snoot, reflector, etc.),
turn OFF the modeling lamp and wait for at least 10 minutes before changing
and replacing the accessories.
Never open this unit, high voltage inside.
No internal serviceable parts.
The separation distance of the product is 0.5m at least.
Fomex accepts no responsibility for electric shock or equipment damage
due to unauthorized modification and repairs.
Keep out of children’s reach.
Notice
7
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
electric shock(symbol)
0.5m over(symbol)