•
Modeling light setting (LED 10W)
o
Press the
„LED“
button to control output of modeling light.
o
Press once to turn on/off modeling light, 2 times for highest output and 3 times for
moderate output power.
•
Test button
o
Press the
„TEST“
button.
o
If the flash is full charged,
„Ready“
is displayed.
•
Slave mode
o
Press
the „CELL“ button.
„CELL“
is displayed.
o
Photocell is activated. The flash will slave sync if another flash is fired.
•
Sound setting
o
Press the
„SOUND“
button.
„SOUND“
is displayed.
o
The flash beeps when it is ready to flash again.
•
Battery status indicator button
o
Press the battery status indicator button.
o
The display shows the battery status.
•
HSS
1.
Use the HSS function through wireless trigger (S-III). Combine S-III transmitter with
camera
’
s hot-shoe and install S-III receiver in the slot of the flash.
Compatibility only
with Nikon and Canon.
2.
Press and hold the
„C/HSS“
button for 2 seconds. Press the button one more time and
the letter „h“ is displayed.
3.
Press the
„+“
button on the transmitter. The indicating diode indicates that the HSS
mode is ready for use. Press the
„
-
“
button on the transmitter after photography shoot
ends to save the battery energy.
The wireless trigger is not included.
