Fomei Digitalis Pro S600 DC, Руководство пользователя

Страница: 7 / 12

7
6. Flash modes
The Fomei cordless Strobo flash works with three flash settings modes.
1. Normal mode
• This is the standard mode normally used on all studio flashes.
• Use the control dial (1) to control the flash intensity level from 1.0 f-stop (4.7 Ws) up to 8.0 f-stop
(600 Ws).
• You can adjust the power level in 0.1 f-stop increments (1.0 - 1.0 - 1.2 up to 8.0).
F 8.0 F 7.0 F 6.0 F 5.0 F 4.0 F 3.0 F 2.0 F 1.0
Digitalis Pro S600 DC 600 Ws 300 Ws 150 Ws 75 Ws 37.5 Ws 18.8 Ws 9.4 Ws 4.7 Ws
Colour temperature 5400 K 5450 K 5500 K 5500 K 5600 K 5500 K 5450 K 5400 K
2. High Flash Duration Mode ("T")
• In this mode you only set the flash speed or the discharge lamp duration.
• This mode is used for moving sports photographs and for advertising and creative photography,
where it is necessary to "freeze" movement.
• If you want to use this mode, switch from the Normal mode to the "T" mode using the Mode button
(4). On the FND display values will change to the mode where the first letter is "T".
• After switching back to normal mode you will find the previously set power level.
• You can change the speed power level of the flash from T1 (lowest power level) to T7 (highest power
level) using the control dial (1).
• You can adjust the flash speed in 1 steps.
ATTENTION: If you go from "T" mode to Normal mode, launch the TEST
button several times so that the capacitors achieve the correct flash power and flash
speed.
t 7 t 6 t 5 t 4 t 3 t 2 t 1
Digitalis Pro S600 DC 1/12800 s 1/6400 s 1/4000 s 1/2500 s 1/1250 s 1/640 s 1/500 s
Colour temperature
5400 K 5400 K 5500 K 5600 K 5820 K 6300 K 7500 K
3. Stroboscopic mode "C"
• This function is able to launch 5, 10 and 15 flashes within 1 second.
• The function can be used when the button is switched when Normal mode 1.0 – 1.5 – 2.0 – 2.5 is set.
• Press the RFP button and you will enter mode C1 or C2.
• Now you are in Stroboscopic mode and have the setting of 5 flashes per second.
• Press the RFP button again and you are in the Stroboscopic mode with 10 flashes per second.
• Press the RFP button again and you are in the Stroboscopic mode with 15 flashes per second.
• In this photography mode, use "B" time or you can also experiment with longer times 1/4, 1/8, 1/16s.
• The C2 mode has a higher power level than C1.
• We recommend the use of the stroboscopic mode for photographing moving photographs.
• The colour temperature and the flash speed are similar to mode t 1 and t 2.