46
GB
SIKA PLUS
8.3
CUTTING ANGLES
8.3.1 HEAD ROTATION
The head of the SIKA PLUS can be rotated as follows:
-
From 90° to 45° RH
-
From 90° to 45° LH
By first undoing knob
"1" - Fig. 08-03
and then pulling button
“2” - Fig. 08-03
the head is free to rotate.
Use the handle
“3” - Fig. 08-04
to rotate the head to the required position.
Mechanical end of travel stops determines the positions:
- 90°
- 45° RH
- 45° LH
The intermediate cutting positions are obtained, after pulling out button
“2” - Fig. 08-03
, by rotating the blade using
the handle
“3” - Fig. 08-04
.
The vernier scale is etched into the work table
Reading off the angle required, secure the head by tightening knob
“1” - Fig. 08-03
and releasing button
“2” -
Fig. 08-03
.
08-03
3
2
1
08-04