To select FREEZE, highlight the FREEZE menu item and press SEL. The freeze control menu is then displayed. Off
or On will be highlighted to indicate the current state of freeze. Use the + and – keys to highlight a new freeze state
and press SEL to save the change and return to the picture adjust menu. Press ESC to cancel any changes and
return to the picture adjust menu. If freeze is enabled, FREEZE will be displayed on the system status display.
Freeze Control
Off On
Output Video Format Controls
Selecting OutFmt using the + and – keys to highlight OutFmt and pressing SEL displays the following menu used to
select the output video standard, component video setting, sync on green control, and video blanking standard.
Press ESC to exit this menu and return to the Configuration Menu.
Output Format Menu
OutputStd CompVid
SyncOnGrn BlankStd
Output Video Format:
Video Output Standard (NTSC/PAL)
Selecting OutputStd by pressing the + and - buttons highlight OutputStd and pressing SEL displays the following
menu to control the output video standard selections:
Video Output Standard
NTSC PAL
The currently selected setting is highlighted. Use the + and - buttons to change the selection and press SEL to save
the changes or ESC to cancel the changes. Pressing SEL or ESC will return to the Output Format Menu. The current
setting is displayed on the system status display.
Output Video Format:
Component Video Output (RGB/YUV)
Selecting CompVid by pr or - to highlight CompVid and pressing SEL displays the following menu to control
the component video output setting:
Manual # 26-0109901-00 / Revision C
SmartVIEW – Computer – to – Video Down Converter 13
