Follett REF 12-LB Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 4 / 28

4 REF12 LB
Standard features – all models
Door Dual pane, low-E glass, condensation free to 80 F (27 C) air/60% RH
Door handle ADA-compliant . Glass door: towel-bar style; Solid door: recessed .
Interior/exterior material Heavy-duty, corrosion resistant stainless steel
Casters (4) dual-wheel swiveling casters with toe locks on front (2) casters
Insulation 2" (5 cm) thick, CFC/HFC-free foam insulation throughout
Lighting Glass door: full length LED light in door on handle side; Solid door: overhead cabinet light
Air circulation system Ducted air through 6 back plenum openings with front face return
Temperature probe Platinum RTD (resistance temperature device)
Ambients
Intended for indoor use where ambient temperature, measured at the condenser inlet, does not exceed 80 F (27 C)
and ambient relative humidity does not exceed 60% RH .
Clearances
The top of the refrigerator must have 20 inches (50 .8 cm) of clear space above the refrigerator to ensure proper
ventilation of the refrigeration system .
The back of the refrigerator should have 3 inches (5 cm) of clearance to allow for power cord clearance and
ventilation on unit .
Electrical specifications
§
115 V, 60 Hz, 1 phase
§ Running load amps: 4 RLA
§ Minimum circuit ampacity: 15A dedicated circuit
§ Maximum size of branch circuit overcurrent device: 15A dedicated circuit
§
Follett recommends circuit be protected by GFCI
Refrigeration specifications
§ Refrigerant R134a, 5 .5 oz
Detail drawing
Installation