14
self-contained
DROP-IN • RIDE Technology
➊
➋
• Connect cooling water lines to ice
machine (Water "Out" connects to water
regulator.)
➊
• Water valve is set at the factory.
DO NOT
remove seal or adjust water valve
➋
Cooling lines and power
7.9
CLEANER FULL
DRAIN CLOG
HIGH PRES
HIGH AMPS
SERVICE
MAINT/CLEAN
LOW WATER
TIME DELAY
SLEEP CYCLE
MAKING ICE
LOW BIN
POWER ON
CLEAN
TDS
HIGH
LOW
• Set the TDS switch on the electrical box:
HIGH: for extended service life
LOW: for low-scale water
TDS switch
7.12
• Remove twist tie
• Carefully pass cord thru opening and plug
into wall outlet
• For H_E units, install a suitable plug
Power cord
7.10
• Position plate into opening and secure
with supplied screw
Power cord
7.11
