4
Form# 7040
Remote 1650 series ice machine
1 – Locating the ice machine
Horizon self‑contained Chewblet ice machines allow top‑mounting or mounting in a base cabinet, on a wall or on a floor stand up to
75' (22.8 m) from the dispenser or ice bin with RIDE technology. In‑cabinet mounting (RIDE applications) require special attention to
service access, unit ventilation and ice tube runs (see pages 5‑6).
Top mounting – ice and beverage dispensers (by
others)
RIDE model – Follett low-profile
Vision and Cornelius PR150 ice and beverage
dispensers
Top mount on
Follett ice storage bins
Important specifier notes:
Important specifier notes:
Important specifier notes:
1. Dispenser must be compatible with
nugget ice. See page 5 for compatible ice
and beverage dispenser models and top
kit numbers.
2. Verify ceiling or soffit height to ensure
sufficient top clearance.
1. See page 5‑6 for critical
clearance requirements.
2. Ice transport tube ships with Vision ice and
beverage dispenser (Vision applications only).
3. Ice transport tube ships with Horizon series
ice machine for Cornelius dispensers.
1. See form# B300 for bin sizing.
2. Verify ceiling or soffit height to ensure
top clearance.
3. Locate floor sink or grate and drains in front
of storage bin.
4. Do not position bin drain lines to block
Ice•DevIce
™
bin cart.
RIDE model – ice and beverage dispensers (by
others)
RIDE model – drop-in beverage
dispensers (by others)
RIDE model –
Follett ice storage bins
Important specifier notes:
Important specifier notes:
Important specifier notes:
1. Dispenser must be compatible with nugget
ice. Compatible dispensers include Cornelius
DB/ED/DF150/175, Lancer 4500‑22N and
FS‑16N, Servend MD150/175/200/250,
SV150/175/200/250 and Follett Symphony
Plus
™
110CM, as well as dispensers listed on
page 5.
2. Top kit MSF30SC required with Coca‑Cola
Freestyle 7000. Top adapter 46412 and ice
kit 46430 must also be ordered from Coca‑
Cola. Consult with Coca‑Cola and Follett to
qualify application prior to ordering.
3. See page 5‑6 for critical
clearance requirements.
4. RIDE application is approved only for Pepsi
Spire 3.0 and 5.0 designed for top mount
ice machines and requires MSP24SC for 3.0
and MSP30SC for 5.0, ordered separately. For
manual fill versions of Pepsi Spire 3.0 and 5.0,
contact factory.
1. Compatible with the following dispensers:
Cornelius 1522, 1722, 2323 and Lancer 2200,
2300, 23300.
2. Requires 12.00" (30.5 cm) of access space for
installation on transport tube side.
3. See page 5‑6 for critical
clearance requirements.
1. See form# B300 for bin sizing.
2. Locate floor sink or grate and drains in front
of storage bin.
3. Do not position bin drain lines to block
Ice•DevIce bin cart.