07
Connect the power supply cable to the
GIRO
’s cable in a suitable and consonant
manner.
_
Make sure to disconnect the power supply, connect the cable of the LED
panel to the driver as shown in step b. Connecting the red cable of the
panel with the red cable of the driver and the black cable of the panel
to the black cable of the driver. Subsequently connect the driver to the
electrical system with the 220 V cable and power the system.
Use class II transformers with adequate absorption with regards to the
consumption of the
FOLIO
® panel, with an exit current of 24V and with SELV
exits
EN 61347-2-13
compliant. It is recommended to connect maximum
4/5 Folio panels to one driver.
Dimmable:
PWM - DALI - DMX
DIMMING
b
a
OFF
220 V
DIMMER
PWM - DALI - DMX
red
black
24 V
ON
c
.ELECTRICAL CONNECTION
