v
JoysVck
The primary func2on of the joys2ck is to control the speed and
direc2on of the wheelchair. The further you push or pull the joys2ck
from the center posi2on the faster the wheelchair will move. When
you release the joys2ck the brakes are automa2cally applied. There
is a half second delay in the movement of the wheelchair for safety
purposes.
v
Ba]ery Strength Indicator
The baXery gauge shows you that the wheelchair is switched on. It
also indicates the baXery capacity remaining in the baXery pack.
However, it is not a propor2onal indica2on, so please charge the
baXery when the green light on the baXery indicator disappears.
v
Factory Maintenance Bu]on
The factory maintenance buXon is used for re-‐programming of the
joys2ck controller. Pressing the buXon will not affect normal usage.
v
Lock / Unlock JoysVck Controller
§
To
lock
: When your joys2ck controller is powered on, press
and hold the “on/off” for more than 5 seconds un2l the light
turns off. You will see the baXery strength indicator blinking
and running from right to lea. (The power will turn off
automa2cally aaer a few seconds)
§
To
unlock
: Press the “on/off” buXon to turn on the joys2ck
controller. Then press the “ + ” increase speed buXon 3 2mes.
Page 7
v
Horn Bu]on
Press the buXon to sound the horn.
