Notice:
l
When plugging in an cable with ODU plug, make sure that the red dots on the receiver
port and the cable connector line up. Do not use force to plug cables in, as this may da-
mage the connector pins.
l
When disconnecting an cable with ODU plug, grasp the cable by the sliding collar or
lanyard and then pull the cable connector straight out of the port. Do not twist the
connector or pull on the cable itself.
l
To securely connect a TNC antenna, align the antenna connector with the receiver
receptacle and then thread the antenna connector onto the receptacle until it is snug.
l
Avoid the following sources of electrical and magnetic noise:
a) Gasoline engines (spark plugs)
b) Televisions and PC monitors
c) Alternators and generators
d) Electric motors
e) Equipment with DC-to-AC converters
f) Fluorescent lights
g) Switching power supplies
l
Avoid exposure to extreme environmental conditions, including:
a) Water
b) Heat than 65
c) Cold less than -30
d) Corrosive fluids and gases
8. Connecting radio and storage with cable FDL-1-1 and cable FDL-1-2.
*
*
check from A20 equipment list
A20 User Manual
7
