Fogo Montanha Trama, Инструкция по эксплуатации, Страница: 28 / 50

22
Set up timer menu Procedure
Accessing the P1 to P6 menu

Press the “+” or “-“ key to select the
desired programme.

Press “Set” to confirm the selected programme.
The Prog. menu is displayed followed by ‘Habilitação’
(Activation).
Activating the programme

Press “Set” again. The display starts to flash.

Press the “+” or “-“ key to select “On” or “Off”.

Press “ok”, to confirm your selection.

Press the “+” key to go to the ‘H. Início’ (Start time) for
the selected P menu.
Activating the programme start time

Press “Set” again. The display starts to flash.

Press the “+” or “-“ key to select the desired time.

Press “ok”, to confirm your selection.

Press the “+” key to go to the P menu… H Stop.
Activating the programme stop time

Press “Set” again. The display starts to flash.

Press the “+” or “-“ key to select the desired time.

Press “ok”, to confirm your selection.

Press the “+” key to go to the P menu… Temp. Air (Air
temp.)
Selecting set point room temperature (*)

Press “Set” again. The display starts to flash.

Press the “+” or “-“ key to select the desired
temperature.

Press “ok”, to confirm your selection.

Press the “+”key twice to go to the P menu…Fire.
Activating the desired power for the programme (*)

Press “Set” again. The display starts to flash

Press the “+” or “-“ key to select the desired
power.

Press “ok”, to confirm your selection.

Press the “+” key to go to the P menu… Dia (Day).
Activating the operating weekdays for the desired programme

Press “Set” again and the display starts to flash

Press the “+” or “-“ key to select the desired day.

Press “On ” or “Off” according to your option

Press “ok”, to confirm your selection.

Press “esc” twice to exit the timer configuration.
(*)Warning: Between the set point room temperature function and the desired power function, there is a third option not applicable to this unit.