Foerster TAK5-CH1-25, Инструкция по эксплуатации

Страница: 148 / 226

148 Cleaning
The sponge is pressed by the water through the stainless steel
coil.
7. As soon as sponge cleaning is completed, remove the
sponge ball from the mixer jar.
8. Confirm sponge removed? with .
9. The cleaning water is drained off via the mixer draining valve,
if available. If the draining valve is missing, tip over the mixer
jar to empty it.
10.Rinse with clear water. To do so, use the menu „water HE“ in
the manual functions ( ).
9.8 Rinsing the hose
The suction hose can be rinsed each time a calf visits the feed-
ing station.
As soon as an animal has drunk up the last portion to which it is
entitled, the automatic feeder dispenses 0.25 liters of warm
water into the mixer jar (after draining time has lapsed). As an
animal usually stays a little bit longer in the feeding station suck-
ling at the teat, in this way the suction hose can be easily rinsed.
1. > cleaning > hose rinsing
2. Select the desired group.
sponge
inserted?
sponge
removed?
Note: If there is some air in the hose, the water will not
drain off. You can activate the feeding pump in support
of this process. To do so, press .
Note: If the cleaning sponge pushes forward dirt or de-
posits, you should repeat the cleaning process immedi-
ately afterwards and later on at regular intervals.
cleaning
...
hose
...