FODSPORTS BT-S3, Руководство пользователя

Страница: 8 / 87

The charging cable has a small USB plug for the headset and the large
USB plug for the computer or AC adapter; please observe to correct
orientation of the USB plug and socket before inserting
(1) Insert the USB plug of the charging cable, into the USB small jack of
the headset; you can either charging by computer or AC adapter.
(2) While charging, the red LED on the headset module will illuminate,
when the charging is finished, the red LED will extinguish. A normal
charge from a low battery will take about 4 hours.
Note: if you do not use the headset for a month or more, to protect
the Poly-Li battery, please charge the headset at least every month.
(The fault damaged by wrong charging will be not guaranteed).
Turning the Unit on into Standby Mode
Press and hold the power/intercom button at the end of the unit.
After 3 sec you will hear a "Di" and the blue LED will begin to flash. Let
go of the button and the unit is now in standby mode.
Turning off the Unit
Press the power /intercom button for 5 seconds until you hear a "Di"
tone and the lights extinguish.
Note:When turn off the unit, please don't loosen the power /inter­
com button when hear "dudu"tone. If so, the Bluetooth memory will
be cleared away.
To Pair to Your Bluetooth Enabled Mobile Phone
1. Turn on the unit into standby mode (only need blue light flashing).
2. Open the Bluetooth function on your mobile phone.
3. Bluetooth on your phone will search the device until you see BT-S3.
4. Click "BT-S3" on your phone, you will hear "DiDi" tone when pair
successfully.
7
I