Focusrite Clarett4 Pre Скачать руководство пользователя страница 13

Страница: 13 / 19

2 . Recording a drum kit with (and without) the optical connection

In .addition .to .the .eight .analogue .inputs, .the .Clarett .4Pre .has .an .ADAT .input .port .(OPTICAL IN) .which .

can .provide .an .additional .8 .audio .inputs .at .44.1/48 .kHz .sample .rate, .four .at .88.2/96 .kHz .or .two .at .

176.4/192 .kHz. .Using .a .separate .8-channel .microphone .preamplifier .equipped .with .an .ADAT .output .

– .such .as .the .Focusrite .OctoPre .MkII .– .provides .a .simple .and .excellent .method .of .expanding .the .

Clarett .4Pre’s .input .capability. .This .could, .for .example .extend .the .scope .of .the .recording .example .

above .to .include .a .close-miked .drum .kit, .as .shown .below.

Octopre MKII

8ch Mic Amp

The .OctoPre .MkII’s .OPTICAL OUT .port .is .connected .to .the .Clarett .4Pre’s .OPTICAL IN .port .with .a .

single . TOSLINK . optical . cable. . Stable . ADAT . synchronisation . may . be . achieved . by . choosing . the . .

Clarett .4Pre’s .clock .source .(in .Focusrite .Control) .to .be .the .ADAT .format .signal .at .the .OPTICAL IN .

port.

Содержание Clarett4 Pre



















