12
When mixing, you can connect an additional pair of speakers (mid-field, near-field, etc.) to
LINE OUTPUTS 3 and 4 to check your mix on different types of speaker. You can easily configure
Focusrite Control to route the mix to these outputs as well as Outputs 1 and 2.
Main
Monitor
Speakers
Additional
Monitor
Speakers
IMPORTANT:
LINE OUTPUTS 1 and 2 incorporate “anti-thump” circuitry that protects your speakers if
the Clarett 4Pre USB is turned on while the speakers (and amplifier if used) are connected
and active.
LINE OUTPUTS 3 and 4 do not have this circuitry.
If you’re using additional speakers connected to these outputs, we recommend you power
your Clarett 4Pre USB on first,
then turn on the speakers or power amplifier. But get into
the habit of following the general rule in any case - it is
always good audio practice to turn
on a speaker system of any kind
after turning on the equipment feeding it.
