FTS20204 - Battery Operated Lag Driver
TOOLS STICKERS & TAGS
Focused Technology LagEase - Logo Decal –All-In-One Product Label-FTS20204-CPD01
Focused Technology LagEase - Tool Logo Decal-FTS20204-CPD02
Focused Technology LagEase - Focused Technology Contact Information Decal-FTS20204-CPD03
Focused Technology LagEase- Focused Technology Solutions U.S.A. Decal- FTS20204-CPD04
NOTE: THE INFORMATION LISTED ON THE STICKERS SHOWN, MUST BE LEGIBLE AT ALL TIMES. REPLACE DECALS
IF THEY BECOME WORN OR DAMAGED. REPLACEMENTS ARE AVAILABLE FROM YOUR LOCAL FocusedTS
DISTRIBUTOR. A REPLACEMENT FEE MAY BE INCURRED.
OPERATION
PRE-OPERATION SAFETY INSPECTION
CHECK BATTERY POWER SOURCE 1. Make sure the battery is fully charged. 2. Remove battery prior to inspecting
the tool.
CHECK TOOL 1. Make sure all tool accessories are correctly installed. Failure to install tool accessories properly
can result in damage to the tool or personal injury. 2. There should be no signs of damage or missing parts. 3.
The tool should be clean, with no loose or missing parts.
CHECK TRIGGER MECHANISM 1. Check that the trigger operates smoothly.
BEFORE DRIVING SCREW SPIKES/LAGS 1. Make sure the tool runs freely in both directions.
FTS20204 Operation Manual 1-13-21
973.705.7170
4
