Focus TView PresoCard, Руководство пользователя

Страница: 16 / 37

DRIVER SETUP
NOTE: Your computer’s video driver must be set to a VGA-com-
patible setting.
CRT Activation Key
When using the TView PresoCard, you should use the
CRT Activation key combination specific to your comput-
er. Most Laptop computers have an “F” key (such as F1,
F6, F12 - each model is different) with "CRT" marked on
the side facing you. Others have an icon of a monitor.
Find this key and press it in combination with the "Fn" key
to activate the CRT output of your Laptop. If you cannot
find the CRT Activation F-key on your Laptop, consult
your Laptop manual for more information about connect-
ing an external (CRT) monitor.
Windows 95
Open the Control Panel, then the Display Icon. Click the
Settings Tab. Click Change Display Type, and make sure
that your Display type is set to VGA Standard 640x480. If
the signal is still distorted, repeat the previous steps and
set the Adapter Type to Standard VGA.
NOTE: Whenever changing your control panel settings, be sure
to write the previous settings down on a piece of paper,
just in case you need to change it back.
Windows 3.1x
Use the Windows Setup program (located in the Main
Program Group) to specify your Display Driver.
Recommended Windows 3.1 drivers include: VGA,
Super VGA-640x480, VGA 3.0, GD5434 640x480x256, and
GD5434 640x480x64K.
FOCUS Enhancements TView PresoCard User’s Manual
10