2] Set if it can connect with alarm control panel by MODEL 2.
A. In short circuit condition, electronic switch would not communicate with the alarm control panel. only with remote
controller.
B. In open circuit condition, electronic switch communicate both alarm control panel and remote controller. Factory
default is in open circuit condition.
5.
5.
5.
5. Introduce
Introduce
Introduce
Introduce For
For
For
For 3
3
3
3 Channel
Channel
Channel
Channel Operation.
Operation.
Operation.
Operation.
1. Touch button operation notice
To touch
all the buttons, respectively control the corresponding switch (
off
,
on
)
2. Enroll to the alarm control panel setting. ( MODEL 2 must be in open circuit condition)
Enroll first channel. First enter into the alarm control panel enroll menu, after hear the voice indication from the alarm
control panel, please trigger electronic switch, the LCD will display
.
Then touch one channel switch
you want to enroll untill its lights on and hold on 15 seconds .Till the touch button light blink every 0.1 seconds. At the
same time use your another hand to confirm button. Press
on panel. The panle will give a voice in
dication
enroll successfully, and The LCD will dispaly
and you can continue to enroll extra two channels by the
same way or
press panel's back button to exit.
3. Enroll to our EAVS series alarm control panel setting.
Touch one of channel you want to enroll untill its light on and hold on 15 seonds, till the light blink every 0.1 seconds
frequency. Then the switch will emit the signal. ( more details refer to the manual for the EAVS).
4. Enroll to the remote controller.
Touch three button
for
30 seconds until its light. The light will blink every 0.5 seconds at the moment.
Then trigger the any button on the remote controller, the three light will slow blink in one time and long light to exit at
the moment. It means enroll succeed.
5. Delete remote code.
Touch three buttons
to off status at the same time, the light will be blink every 0.5 seconds. then
quick blink 5 times and light off. Then delete all the remote.
6.
Operation for remote controller.
