iTView DV User’s Guide
Hardware Installation 16
To connect the iTView DV unit to your television, perform the
following steps:
1.
Connect one end of the supplied composite video cable to the
“Comp Video” port located on the side of the iTView DV unit, or
connect the male end of the S-Video cable to the port on the
side of the iTView DV labeled either "SCART/S-Video."
2.
Connect the other end of the composite cable or S-Video cable
to the Comp Video in or S-Video in port at on the television.
3.
Turn the television on.
4.
Plug in the power adapter for the iTView DV.
5.
Turn your computer on. If the cables have been connected
correctly, the image from the computer monitor should now
appear on the television screen.
Figure 2-5: Connecting iTView DV to the Television
