Focus HMI PLC USER MANUAL
Fultek Kontrol Sistemleri San. Ve Tic. Ltd. Sti.
Address: Buyuksehir Mah. Cumhuriyet Cad. Ekinoks E2 Blok K:2 D:8 Beylikduzu / ISTANBUL
Phone: +90 212 871 0128 / Email: [email protected] / Web site: www.fultek.com.tr
ABZ Encoder 2x:
When ABZ type 2x Encoder is selected, the A endpoint of the
Encoder should be connected to the pin where the selection was made, B endpoint should
be connected to the next input and Z pin should be connected to the next input.
ABZ Encoder Connection
AB Encoder 4x:
When AB type 4x Encoder is selected, the A endpoint of the
Encoder should be connected to the pin where the selection was made, and the B
endpoint should be connected to the next input.
ABZ Encoder 4x:
When ABZ type 4x Encoder is selected, A endpoint of the
Encoder should be connected to the pin where the selection is made, B endpoint should
be connected to the next input and Z pin should be connected to the next input.
Frequency 1000ms:
It is the input type which counts the pulses applied to the
input within 1000 ms. The count is repeated every 1000ms and the value in the counter
is updated.
Period Rising Edge:
It is an input type that is used to measure the time
difference between periods. The measurement is found by calculating the time difference
between the rising edge of the first signal and the rising edge of the subsequent signal.
The measurement is made in microseconds. The measurement resolution is 1
microsecond. The minimum continuous measurement period is 10 microseconds.
Period Falling Edge:
It is an input type that is used to measure the time
difference between periods. The measurement is found by calculating the time difference
between the falling edge of the first signal and the falling edge of the subsequent signal.
The measurement is made in microseconds. The measurement resolution is 1
microsecond. The minimum continuous measurement period is 10 microseconds.
Содержание HMI Basic
Страница 1: ...FOCUS HMI PLC USER MANUAL...
