4
4
Notice:
Notice:
1. The LED on the USB receiver always blinks whenever this keyboard is
1. The LED on the USB receiver always blinks whenever this keyboard is
being operated.
being operated.
2. Please replace batteries when the battery low LED is in red blinks.
2. Please replace batteries when the battery low LED is in red blinks.
3. If the default of ‘Num Lock’ in Windows is on; please press the keys of ‘ Fn ‘
3. If the default of ‘Num Lock’ in Windows is on; please press the keys of ‘ Fn ‘
+ ‘ Num Lock ‘ if you want to disable it. If this default of ‘ Num Lock ‘ does not
+ ‘ Num Lock ‘ if you want to disable it. If this default of ‘ Num Lock ‘ does not
meet your preference exactly, it is recommended to check or change
meet your preference exactly, it is recommended to check or change
relevant setting in ‘ Registry Editor ‘ of your computer.
relevant setting in ‘ Registry Editor ‘ of your computer.
4. Trouble Shooting:
4. Trouble Shooting:
If your keyboard cannot work properly after installation, please check
If your keyboard cannot work properly after installation, please check
followings for troubleshooting.
followings for troubleshooting.
a. Make sure that the USB receiver is correctly plugged into computer’s
a. Make sure that the USB receiver is correctly plugged into computer’s
USB port.
USB port.
b. Make sure AA batteries x 4 are equipped correctly, especially polarity
b. Make sure AA batteries x 4 are equipped correctly, especially polarity
(+), (-).
(+), (-).
c. Be sure that the distance between your wireless keyboard and its USB
c. Be sure that the distance between your wireless keyboard and its USB
receiver is within 10 meters and there shall not have interference
receiver is within 10 meters and there shall not have interference
against other peripherals.
against other peripherals.
d. Interference would possibly occur if there are two more units used in
d. Interference would possibly occur if there are two more units used in
the same place; it is required to reset the ID when interference occurs.
the same place; it is required to reset the ID when interference occurs.
Please refer the paragraph of ‘ID Setting ‘.
Please refer the paragraph of ‘ID Setting ‘.
Battery Low LED
