Focus Firestore FS-M, Руководство пользователя

Страница: 34 / 79

MANL-0977-01 Review Draft - FS-M User Manual
21
Accessing the FS-M
3.2.1 Connections
Connecting the FS-M to the network requires standard, 10Base-T ethernet cable.
1.
Verify that the FS-M and the computer are powered-off. If a hub is to be used,
power it off too.
2.
Connect the FS-M to the computer.
• Use the ethernet cross-over cable included with the FS-M.
• If a hub is used as an intermediate, use standard ethernet 10Base-T cables.
3.
Power-on the two units.
3.3 Accessing the FS-M
The three procedures below describe how to use an internet browser to initially access the
FS-M.
3.3.1 Access When the FS-M is a Peripheral
1.
Open a browser such as Internet Explorer or Foxfire.
2.
Enter the default IP address for the FS-M in the URL field and press
Enter
.
The FS-M Web application appears in the browser window.
For information about the FS-M Web application, see
FS-M Web and FTP
Interfaces on page 29
.
3.3.2 Configuring the FS-M as a Network Device
Before installing a FS-M on a network, it is often necessary to configure it’s IP and
subnet mask address to conform with the network.
1.
Make a direct connection between a computer and the FS-M.
2.
Access the FS-M
System Config
screen.
• Open an internet browser.
• Enter the default IP address of the FS-M and press enter.
The FS-M Web Interface appears in the browser window.
3.
In the Web Interface main screen, click on the
System Config
tab.
For information about the FS-M Web application, see
FS-M Web and FTP
Interfaces on page 29
.
4.
Enter the TCP/IP addresses appropriate for the network.
FS-M Factory Default Address Settings
IP address: 192.168.0.102 ,
Subnet Mask:
255.255.255.0
,
If the FS-M has been in use, its IP address may have been changed. To
determine the current IP address using the FS-M front control panel, see
Network on page 11
.