4. CHARGING THE BATTERY
INFORMATION
The battery can remain on the Pedelec during the charging process. It
can also be removed and charged elsewhere.
1.
2.
3.
4.
5.
6.
Connect the power cable to the battery charger.
If you are charging the battery on the bicycle, now, slide the cover
flap of the charging socket to the side. Then, insert the charging
plug into the charging socket on the battery until it clicks into place.
Insert the mains plug into a power socket. The LED on the charger
lights up red continuously. The battery charge level is displayed.
The charger switches off once the battery is fully charged. The LED
on the charger lights up green continuously. The LEDs then go out.
After completing the charging process, remove the power plug
from the socket.
Remove the charging cable from the battery charging socket.
OPEN THE COVER FLAP
4.1 BATTERY DISPLAY DURING CHARGING
DISPLAY
DESCRIPTION
4 LEDs light up
3 LEDs light up
2 LEDs light up
1 LED lights up
1 LED flashes
CHARGE LEVEL
80 – 100%
60 – 80%
40 – 60%
20 – 40%
0 – 20%
INSERT THE PLUG INTO
THE
SOCKET
