9B
CONTROL ADDRESS
The control address, also known as the start channel, is the first channel used
to receive instructions from the controller. The address may be any channel
from 1 to 511 and is set on the Address DIP switch.
The BF-3000D uses 1, 3, or 4 channels depending on the control mode. For
independent control, each fixture must be assigned its own address and non -
overlapping control channels. Two or more BF -3000Ds may share the same
address if individual control is not required.
DMX 512 Address Chart:
Dip-switches
# 1
# 2
# 3
# 4
# 5
# 6
# 7
# 8
# 9
#10
Value
1
2
4
8
16
32
64
128
256
No effect
•
Examples:
Unit 1
：
dip / on: #1 (=1)
Unit 2
：
dip / on: #1, #2, #3 (1+2+4=7)
Unit 3
：
dip / on: #1, #3, #4 (1+4+8=13)
Unit 4
：
dip / on: #1, #2, #5 (1+2+16=19)
