12
12
1.3 Use
Warning!
Risk of injury, burns, fire and electric shock.
Warning!
Warm surface.
The surface of the product becomes hot during use and must be handled
with caution. Any repairs or changes to the product must only be done by an
approved service technician in collaboration with the manufacturer.
In case of any service or replacement of components, the product must be
disconnected from the mains.
Warning!
In the event of damage to the product or the product’s
electrical cable, it must immediately disconnected from the mains and
taken out of use.
Warning!
The product contains electrical connections and must not
come into contact with water.
Important!
This Hot Plate is a class 1 electrical product and must sit on
level ground.
The product must be protected from moisture, water spray and rain.
The product must not be immersed in water or other liquid.
When cleaning, disconnect the product from the mains and ensure that it has
had time to cool down from the last use. The product must not be cleaned
with high pressure washing. Follow the instructions for care and cleaning
found in Chapter 2, “General Information”.
Installed product must not be covered.
1.4 Waste Management
Dispose of the product according to the applicable regulations and
instructions at the place where the product is disposed of.
