background image

Fixings

E

 x 

2

 PCS  

F

 x 4 PCS  

With a pencil mark out the desired height where you would like the mirror brackets (H) to be situated on the rear of the legs. 
To avoid splitting the leg, pre drill the bracket holes with a 2mm drill bit. Now attach the brackets to the legs using the 3x12mm screws 
(F). Once the brackets are in position, centre and level the hearth into its final fitting position. Position the surround on the hearth to 
correspond with the header/ fireplace lintel, mark with a pencil on the wall where you wish to drill. Remove the surround and prepare t
he wall from the marked positions. If using the fixings supplied, drill a  hole in the wall using a 6mm drill bit. If not, use a suitable drill bit 
for the wall plugs you are using. Insert the  wall plugs (G) into position. Offering the surround back up into position against the wall, you
are now able to secure the surround to the wall using the 4x30mm screws (E).

5

© 

202

1

 Focal Point Fires Ltd.

F

861604

 

As our policy is one of continuous improvement and development, we hope therefore you understand we must retain the right to amend details and/or specifications without prior notice.

Before carrying out any of the following operations, ensure that the appliance is OFF and completely cold. Regularly clean
around the appliance to ensure that dust, fluff, pet hair etc, are kept to a minimum. There are no other specific requirements for
care, other than regular cleaning of the general appliance.
A wipe with a dry cloth is normally sufficient. 

DO NOT

use abrasive cleaners as they can damage the finish. Test on a hidden

part before cleaning. Clean only in the direction of the grain. Regularly check the surround is securely fixed in position.

7.0 GUARANTEE - TERMS AND CONDITIONS

The 3 year guarantee commences from the date of purchase, provided that the terms and conditions are adhered to:

Registration is not required. 

1. For any claim to be made within the 3 years from date of purchase you will be required to provide and supply us with your
proof of purchase.

Making a claim is easy. 

If you wish to make a claim under our 3 year guarantee and all the terms and conditions for your product have been met then
please submit the following information for the attention of the 3G Service Department to the address below. Alternatively, you
can email or fax. Please note that this does not affect your statutory rights.

Focal Point Fires Ltd, 3G Service Department, Reid Street, Christchurch, Dorset, BH23 2BT. 
Alternatively email: [email protected] or fax. 01202 499326.

Details required: 

1. Name, full address including post code and contact telephone number.

2. Receipt of purchase or credit card statement.

6.0 CLEANING/ FINISHING

GB IE

5.0 INSTALLATION

GB IE

G x 2 PCS

H x 2 PCS

Отзывы: