FOCAL MANAGER DSA 500 RT EXPERT PERFORMANCE
U s e r m a n u a l
9
A
G\QDPLF
]RQHERWWRPRISDJH
(fig. 9)
Clicking on the equaliser curve loads the parametric equaliser.
For each of the 7 equaliser points available, the data entry box can be used to change the central correction frequency
(in Hz). Select the frequency around which you want to apply a correction. This parameter makes it easy to modify the
tonal balance or frequency accidents due to the behavior of your vehicle’s passenger compartment.
(fig. 10)
(fig. 9)
(fig. 10)
For each of the 7 equaliser points available, the vertical linear potentiometer allows you to change the correction value
(in dB). You can also change these values using the keyboard, from -12dB to +12dB.
(fig. 11)
(fig. 11)
,1'(7$,/
Ì
The total potential correction range is 24 dB. In practice, the corrections to be applied should never
exceed 6-8 dB. If you are under the impression that a correction is having no effect, and that correction has reached
values in excess of 9-10 dB, it is likely that equalisation is not the sole solution available for improving your listening
experience. Correcting delays and/or filters should be tried in order to obtain better results.
!
