Focal FDP 1.2000, Руководство по эксплуатации

Страница: 4 / 8

4
TWO AMPLIFIERS IN BRIDGED MODE
(SEE GRAPHIC A3)
• TWO FDP 1.2000 amplifiers are required.
• Amplifier #1 will have
MASTER
switch selected.
Amplifier #2 will have
DIRECT
switch selected.
• Crossover and level controls will only function on
MASTER
amplifier #1.
• By selecting
DIRECT
on amplifier #2 all crossover and level controls are bypassed and the
LEFT
input channel
must be used.
• Master Amplifier #1 will receive the source signal on left and right channels.
Master Amplifier #1 RCA “out -” will connect to direct amplifier #2 RCA “L IN”.
The
LEFT
input channel must be used.
• The (s) will connect to Amplifier #1 (+ speaker).
The (speaker -) will connect to Amplifier #2 (+ speaker).
• The (speaker -) on Amplifier #1 will connect to (speaker -) on Amplifier #2.
SUBHARMONIC SYNTHESIZER
SUBHARMONIC SYNTHESIZER
SUBHARMONIC SYNTHESIZER
(Diagram below only shows
this portion of the amplifier)
RADIO
MASTER
DIRECT
A3:
TWO AMPLIFIERS IN BRIDGE MODE
+
–
REMOTE SUB CONTROL
THESE CONTROLS ARE BYPASSED
SUBWOOFER