Page 2 of 8 | 20220322
User Manual: 5 Gallon Smart Foam Unit | English
READ ALL INSTRUCTIONS BEFORE OPERATING EQUIPMENT
Model No.: FI-5N-SM, FI-5NK-SM, FI-5NV-SM AND RELATED UNITS
Read this manual completely and understand the
machine before operating or servicing it.
•
Read all instructions before installing or operating unit.
•
Always wear appropriate personal protective equipment
(PPE) when operating or servicing unit.
•
Always follow all chemical safety precautions and
handling instructions provided by the chemical
manufacturer and Safety Data Sheet (SDS).
•
If this unit is modified or serviced with parts not listed in
this manual, the unit may not operate correctly.
•
Never point the discharge wand at yourself, another
person, or any object you do not want covered in
chemical.
•
Always keep the air trigger port clean and free of
blockages or debris. If the port becomes dirty or
blocked, disconnect the compressed air source from
the unit immediately and clean out the port before
proceeding.
•
Always keep the discharge hose free of kinks or
obstructions.
•
Always rinse and drain unit after use (as described in the
After Use Instructions). Always store unit disconnected
from the compressed air source.
•
Do not exceed an incoming air pressure of 100 psi (7
bar).
•
Do not exceed a fluid temperature of 100˚F (37˚C).
•
Always flush the unit with fresh water for 5 minutes
when switching from an alkaline to an acid or an acid to
an alkaline.
•
Only use clean and dry air. Air must be filtered and free
of moisture or pump life will be diminished. If needed,
install a water separator (WS-20CFM) before the unit.
•
Do not use an air lubricator before the unit.
WARNING
PROTECT THE ENVIRONMENT
Please dispose of packaging materials, old machine
components, and hazardous fluids in an environmentally safe
way according to local waste disposal regulations.
Always remember to recycle.
*Specifications and parts are subject to change without notice.
OPTIONS
Pump Seal Material
FI-5N
Santoprene (
standard
)
-SM
Viton
(V)
Kalrez
(K)
Add bold option codes to item number as shown. For standard
options, no option code is needed.
Examples:
•
FI-5N-SM (standard unit with Santoprene pump seals)
•
FI-5NV-SM (unit with Viton pump seals)
