FNW FNW7XX Скачать руководство пользователя страница 1

RESILIENT-SEATED CARTRIDGE STYLE

FNW7XX

BUTTERFLY VALVE

INSTALLATION INSTRUCTIONS

FNW.COM

We reserve the right to modify or improve the designs or 

specifications of our products at any time without notice.

1

FNW resilient-seated Butterfly Valves have been designed and manufactured for fluid control handling in suitable 
mechanical systems.  This instruction manual includes installation, operation and maintenance information for the 
FNW resilient-seated butterfly valve. It is important to read and understand the following instructions to assure safe 
and trouble-free operation. Failure to follow these instructions may result in reduced valve performance and void 
manufacturer's warranty. This manual addresses manually operated valves, including lever and gear operated only. 
For complete actuation, options and accessories information, consult the specific device’s manual.

SCOPE:

The purpose of this manual is to ensure that the valves 
supplied are properly installed, handled, operated and 
maintained to give trouble-free performance.
This manual covers FNW resilient-seated butterfly valves.

NOTES:

 

Read the manual carefully before removal, installation, 
maintenance or operation of the valve.

 

Refer to general arrangement drawings to identify the 
design, as valves may vary in features and parts.

 

Pay attention to warnings and illustrations carefully.

TABLE OF CONTENTS

General Safety .......................................................... 2
General Information ................................................. 2
Transportation ........................................................... 2
Packing and Unpacking .......................................... 2
Storage ........................................................................ 3
Pre-Installation .....................................................3–5
Installation Considerations in Piping ................... 6
Installation ............................................................. 7–9
Operation ..................................................................10
Maintenance .......................................................10–11
Precautions Before Disassembling  

the Valve from the Line ..........................................12
Removal of Valve from Piping ..............................12
Troubleshooting ................................................ 13–14
Part Information ................................................15–16
U-Section Part Information ................................... 17
Butterfly Valve Assembly ......................................18
Butterfly Valve Disassembly.................................19
Warranty ...................................................................20

Содержание FNW7XX





















Отзывы: