4
CRD7101PB Hardware Installation
Step 1.
Carefully unpack the package and take out two pre-configured
AIC Drives.
Step 2.
Power off the motherboard and locate the two PCIe slots (x16).
Figure 1 - PCIe x16 slot diagram
Note: Please consult your motherboard manual for more
information about the system’s PCIe configuration.
Step 3.
Carefully pick up an AIC Drive, align the host Interface with
the PCIe slot, and gently press it in. Repeat this step to install
another AIC Drive.
For example, the image below shows the installation of
CRD7101PB on MacPro2019.
