User Manual
3.Attention: The product must be connected to a certified alarm system.
4.During the maintenance and installation phases, do not stand near the smoke exit
hole.After supplying do not touch the device because it is extremely hot!
5.During the entire installation phase keep the wires short-circuited, following the
procedure described.
6.Connect the electric wires(means of igntion) to the alarm output (non-polarized
continuous voltage) of the anti-theft control panel, respecting the electric current value
required for ignition.
7.Before you connect the smoke generator, at the end of the test the product using a
light or sound source.
Dimensions
：
