9.
Operating Instructions
1.
Plug the machine into a suitable power outlet. The buzzer will
beep once. The machine will run a short diagnostic test. Wait
for the power on/off light to start flashing. Press the on
button.
2.
Provided the temperature is above 15
C with the humidity
above 25% the machine will begin to produce water. The
display will show temperature, humidity, PM2.5, disinfection,
filter, water level and other functions will be on.
3.
Water level shows the cold water level, when the water level
of the cold water tank is too low or empty, the water level
light flashes and the machine will not allow water dispensing.
Wait until the tank level reaches low level or higher on the
display.
4.
Low, medium or high levels of the cold water tank. The
machine will allow dispensing of cold water.
HYDROLOGIC-AWG.COM
