3 - DIN RAIL REMOVAL
WARNING
Before removal, switch off the power
supply.
Heater surface is HOT. Allow heater to
cool to a safe temperature before
handling.
4 - ELECTRICAL CONNECTION
WARNING
Before installation, switch off the power
supply.
Electrical connection must be done by
trained personnel according national,
state, and local codes.
Use an appropriate thermostat to control
heater and maintain set enclosure
temperature.
Connect the heater according to wiring
diagram. Thermostat should switch the Line
side of the power supply.
Consult local codes and use adequately sized
wire for the voltage/wattage of the heater
being installed.
Fan heaters are fitted with a dedicated ground
terminal. It must be connected to an adequate
ground circuit according to local codes.
WIRING SPECIFICATIONS
Terminal Type
Screw Terminals
Max. Wire Size
14AWG (2.5mm
2
)
Protection Class
Class 1; Earthed
Fan heaters feature a thermal cut out
switch in case of fan failure. It prevents
overheating which could damage the unit.
5 - CLEANING, MAINTENANCE, AND
DISPOSAL
Cleaning and maintenance must be done only after
switching off power supply. For cleaning, use only a
dry cloth and compressed air.
Fan heaters must be disposed of separately from
ordinary household waste.
Doc: FTM-HT-FA-INST
Date: 2.4.21
