FMUser FUTV4658, Руководство пользователя

Страница: 24 / 32

To stop USB device
recording or playing TS
1 Configure TS playing
parameters and click ‘set’ to start
playing TS files.
2 Click ‘stop’ to stop playing TS
and the recording section above
is available to operate.
Detailed Explanation:
There are 3 record modes provided: s
Figure-6
For reading USB
device status
1. Configure TS file
parameters and click
‘set’ to start recording.
2 Click ‘stop’ to stop
recording TS and the
playing section below
is available to operate.
l “Single file”: For example, when the file size is set as 1000M and the *.ts is recorded up
to 1000M, it automatically stops recording TS.
l
“Segment file”: For example, when the file size is set as 1000M and the *.ts is recorded
up to 1000M, it automatically saves the files and continues to record TS and save it to
next file until the USB memory is full.
l “Loop record”: It automatically saves the files and continues to record TS and save it to
next file. When the USB memory is full, it replaces the previous file.
Advanced Config:
File Name: Users can enter this menu to edit name for the *.ts files to be recorded. For
e
xample, if users name it “Record-”, it will give name to the saved *.ts files
“Record-001.ts”, “Record-002.ts” “Record-00N.ts”.
File Size: users can set the file size for the *.ts to be recorded. A single file can be
maximum 2047M in size.
Data Mode: There are 3 data modes:
l Mode 1 (The ts files will be saved in 188-byte packages with null packet embedded.);
22