FMUSER INTERNATIONAL GROUP INC.
广州市汉婷生物科技开发有限公司
30
/
43
4.3.1 Parameters Setting
Users can click Equipment Name on the node tree and enter in the Parameter
interface by clicking
and
or
to configure the
parameters.
4.3.1.1 General Parameters
Set:
to make the current parameters shown in the SNMP software activate.
Get:
to read the current device’s activating parameters and show them on SNMP
software.
Ø
IP Out Enable
Check the checkbox with “√”, then the IP output is enabled, otherwise it is not.
Users can decide whether to open the IP output function or not.Users can modify
the IP address here as well.
Ø
IP Out Address/Service IP Address/Service Mask/Service Gateway
Users can set the address by modifying the value in these four fields.
User can check version
information in this area.
