FMUSER INTERNATIONAL GROUP INC.
广州市汉婷生物科技开发有限公司
13
/
38
3.3 General Settings for Main Menu
Press “
LOCK
” key on the front panel to enter the main menu. The LCD will
display the following pages where user can configure the parameters for
the device:
User can press UP/DOW N/LEFT/RIGHT buttons to specify menu item,
and then press ENTER to enter the submenus as below:
3.3.1 ALARM STATUS
The alarm indicator will turn on if signal source loses or encoding errors
occur. User can then enter this menu to check the error type.
3.3.2 ENCODE SETTING
Enter “
2 Encode Setting
” to configure the Video/Audio parameters for the
input program (HDMI/SDI/YPbPr/CVBS input program). Submenus go as
below:
3.3.2.1 Audio Setting
1 Alarm Status 2 Encode Setting
3 Output Setting 4 Network Setting
5 Saving Config 6 Load Config
7 Version
2.1 Audio Setting 2.2 Video Setting
2.3 Encode Setting 2.4 Encode Start
2.1.1 Audio Input 2.1.2 Audio Bit rate
2.1.3 Audio Format 2.1.4 Audio Channel
2.1.5 Sample Rate 2.1.6 Code Mode
2.1.7 Pass through 2.1.8 Audio-1 PID
2.1.9 Audio-2 PID