FMN alpha EDGE HS, Инструкция по эксплуатации

Страница: 13 / 28

12 13
Putting into operation and indications
Two operating modes are supported:
1. Router: The unit serves as broadband router
2. PPPoE: The unit serves as modem with PPPoE interface
Required software drivers:
In the operating mode PPPoE, a PPPoE driver has to be installed and activated on the PC
which is connected to the
alpha LTE/UMTS 4/EDGE HS .
Microsoft Windows Vista as soon as Windows 7 have included a PPPoE driver. No more
software is required.
Note:
The PPPoE driver for other Windows versions can be downloaded e.g. on the web-
site www.raspppoe.com.
In the operating mode router, only the current Ethernet and network drivers (TCP / IP) are
required on the connected PC. The
alpha LTE/UMTS 4/EDGE HS generates automatical-
ly the requested PPP connection to the provider with the dial-up dates.
After inserting the SIM card and correct cabling of the alpha LTE/UMTS 4/EDGE HS , the
following status indications should be visible at the front of the router (see pictures p. 3-5):
Status indication Meaning
Power external local supply voltage
WWAN
(alpha LTE/UMTS 4 HS) Continuous light with short interruptions: Offline
Blinking (1 Hz): Online
Blinking (0.2 Hz): Bootloader
Blinking (>2 Hz): Update
WWAN
(alpha EDGE HS) Continuous light: Offline, not registered on the
network
Blinking (0,2 s on; 2 s off): Online
Blinking ((0,1 s on; 0,2 s off): Update discontinued
LAN A LAN connection
LAN B LAN connection
SIM 1 / 2 Display active SIM card
Out 1 / 2 In 1 / 2 Display I/O ports activity
For the configuration of the alpha LTE/UMTS 4/EDGE HS a web interface is available,
which can be controlled via a PC which is connected with a LAN cable.
The default IP address of the
alpha LTE/UMTS 4/EDGE HS is 192.168.192.168 with
the network mask 255.255.255.0. The PC which is used for the configuration has to be
configured with “get network address automatically” (DHCP client).
Startup