www.fmiproducts.com
125526-01C
21
INSTALLATION
Continued
8. Place the rear left top log on top of the
middle log and the rear log. Match the
pin on the middle log with the round hole
in the bottom of the rear left top log (see
Figure 34. The rear log has a flat area for
the back of the rear left top log to set in.
9. Place the rear right top log on top of the
middle log and the rear log. Match the pin
on the middle log with the round hole in
the bottom of the rear right top log (see
Figure 34). The rear log has a flat area for
the back of the rear right top log to set in.
10. Place the left and right ember logs as
shown in Figure 35. Do not place the logs
on the ember bed pan they are intended
to cover the sheet metal on the front of
the base assembly.
Figure 33 - Installing Middle Log
Figure 34 - Installing Rear Left Top Log
and Rear Right Top Log
Figure 35 - Installing Ember Logs
Middle
Log
Ramp Log
Rear Left
Top Log
Rear Right
Top Log
Metal Pins
Left Ember Log
Right Ember Log
CONCRETE LOG MODELS
LBG(18,24,30)-BM
Note: Your appliance may vary from model
shown but log placement will be the same.
1. Place fiber ramp log in center of chassis
as shown in Figure 36. The fiber ramp log
can be identified by the shape and much
lighter weight when compared to the other
logs. The log must sit flat on the black
sheet metal and behind the left metal tab
as shown.
2. Place front left and front right logs as shown
in Figure 37.
3. Place left ember bed log as shown in Fig-
ure 38. The log has groove on one side that
sets on the ember bed pan. The back side
Figure 36 - Installing Fiber Ramp Log
Figure 37 - Installing Left/Right Front Logs
Ramp Log
Left Front
Log
Right Front Log
Metal
Tab
